Having your toilet clogged is a frustrating experience. Hence, you might be wondering if there is anything you can do to unclog it without having to call a plumber.
You may have heard that using boiling water is an effective home remedy for this problem. But, can you really use boiling water to unclog a toilet?
Yes, you can use boiling water to unclog a toilet. However, it is important to use caution when doing so. That’s because boiling water can damage your toilet if it is not done correctly. It is also important to note that this method will not work for all types of clogs.
If you decide to use boiling water to unclog your toilet, there are a few things you need to keep in mind. For instance, you have to be careful not to splash the boiling water on yourself or on your bathroom floor.
In this article, we will explain how to unclog a toilet with boiling water. You will also find some tips here on how to do it safely!
How do you unclog a toilet with hot water?
Now, let’s go through the process of unclogging a toilet with hot water.
You’ll need a pot of boiling water, a plunger, and some patience. First, make sure that there is enough water in the toilet bowl to cover the plunger. If not, add some more. Next, follow the steps described below:
Boil a pot of water
At first, take a gallon of water and let it boil.. You can use any container to boil water, but make sure that it is large enough to hold the required amount of water.
Remove the lid of the toilet tank and flush it
This will help to remove any standing water from the bowl and make it easier for the plunger to do its job.
Pour the boiling water
Next, pour the boiling water carefully into the toilet. Be careful not to splash yourself.
Immediately cover the bowl with the plunger
After adding the boiling water, quickly place the plunger over the bowl and make sure that the cup is submerged.
Pump the plunger up and down
Start pumping the plunger up and down vigorously. Continue for at least 30 seconds.
Remove the plunger
Once you’re done pumping, remove the plunger and flush your toilet again. The clog should be gone. If not, repeat the process.
Does pouring boiling water down a toilet unclog it?
Yes, pouring boiling water down a toilet can unclog it. In fact, boiling water is an effective way to break up a clog. The heated water breaks down the dirt, grease and other materials that are causing the clog.
However, it should be noted that extremely heated boiling water will cause damage to the porcelain bowl. If you choose to use this method, be sure to let the water cool slightly before pouring it.
How much hot water does it take to unclog a toilet?
You should boil at least one gallon of water for the hot water toilet flush technique. Place the water in a pan or a pot on the stove and heat it until it reaches the boiling point. You should keep it on the stove for at least 15-20 minutes.
After that, wait for another 5-10 minutes before pouring it into your toilet. You can also try mixing the water with some dish soap to get better results.
The amount of water has to be sufficient enough to break through the blockage and also to clean the bowl. If the water doesn’t seem to be making a difference, you can try using a plunger to help dislodge the blockage.
How do you unclog a toilet when a plunger is not working?
If you have a plunger and it’s not working, there are a few things you can try. Here’s a few known methods that will help you unclog toilet without plunger:
Use a wire hanger
Unbend a wire hanger so that you can have a long, thin piece of wire. Wrap the wire around the end of the plunger and insert it into the drain. Push and pull the wire up and down to try and break through the clog.
Use a drain snake
A drain snake is a long, flexible piece of metal that can help break through clogs. Place your drain snake inside the drain and twist it till you feel resistance. Push and pull the drain snake up and down to try and break through the clog.
Use a vinegar and baking soda mixture
Mix equal parts vinegar and baking soda and pour it into the drain. Let the mixture sit for a few minutes and then flush the drain with hot water.
Frequently Asked Questions
What chemicals do plumbers use to unclog drains?
There are a variety of chemicals that plumbers use while unclogging drains. Some of the most common chemicals used include hydrochloric acid, sulfuric acid, and caustic soda.
What does it mean when your toilet fills up with water then slowly drains?
This is usually caused by a partial blockage in the drain line. Try using a plunger to clear the blockage. In case, the plunger doesn’t work, try the methods that we have listed above.
How long does dish soap take to unclog a toilet?
It depends on the severity of the clog. If it’s a minor clog, you can use hot water and dish soap to unclog toilet and clear it out within a few minutes. However, if the clog is more severe, it may take a few hours or even days for the dish soap to work its way through the blockage.
What does pouring Coke down the toilet do?
Actually, Coca-Cola contains phosphoric acid, which can do some serious damage to your pipes. But, you can use it to clean water stains, and it can also remove molds.
At this point, it should be clear to you that boiling water can be a great way to unclog a toilet. That said, it’s important to remember a few key things to make sure the process goes as smoothly as possible.
First, make sure the water is at the right temperature before you pour it into the bowl. Second, pour the water slowly and evenly around the bowl. Lastly, don’t use too much water or you can end up making the clog worse.