So you are looking to buy the best wooden stud finder, right?

Do you know how to choose the perfect one?

No worry. We are here to give you the right guideline. But before that, here is something for you.

Certainly, finding hidden studs isn’t as easy as it seems. If you follow those DIY tutorials on the Internet, you’ll certainly make several mistakes in the process. If you aren’t lucky, you’ll leave your walls like a Swiss cheese. And that isn’t an option when you don’t have enough money to pay for future repairs.

If finding studs is a blind search for you, it’s time to buy the best professional stud finder. These devices use magnets and sensors to detect the density of different materials behind walls, floors and ceilings. They’re very cheap and easy to use.

With one of these, you won’t spend more than a minute to find the first hidden stud. Certainly, you’ll save a lot of time if you need to drill several studs in the same job. In this article you’ll learn how to choose the best wood stud finder according to your requirements. You’ll also find the 10 best models that everyone is buying this 2022.

Best Wooden Stud Finder 2022

Benefits of Wooden Stud Finder

Certainly, buying the best stud finder will make your household duties much easier. You’ll no longer have to use inaccurate techniques to find hidden studs on walls, floors and ceilings. Forget about using flashlights or magnets. One of these tools will take things to the next level.

Below you’ll find several benefits of using the best rated stud finders.

Versatile

Above all, the best stud finders are versatile, because they can detect:

Durable

Also, stud finders are durable, because:

Money Saving

In addition, stud finders help you save money, because:

Easy to Use

Above all, stud finders are easy to use, because:

Top 10 Wooden Stud Finder Reviews

Are you looking for the best way to find a stud? Don’t worry about that. You just need to buy the best stud sensor to get the job done. But you can’t settle for any cheap model you find on the market. If you want something good, you must do your own research.

Fortunately, you won’t have to work too hard to do that. Here’s the top 10 list with the best stud finders on 2022.

1. Tavool TH250 Stud Finder Wall Scanner

Certainly, the best wall stud finder on the market. Tavool TH250 uses 3 different detection modes to find wooden and metal studs, rebar, pipes and AC wires. Also, this tool allows you to find the center point of each stud to install TV mounting frames and pictures fast and safely.

Tavool TH250 is by far the best wooden stud finder on the market. It’s so easy to use and its ergonomic design fits to the shape or your hands. Its high sensitivity provides a more accurate detection in contrast with other models. However, it isn’t the most appropriate stud finder for concrete and brick walls.

2. VIVREAL VIVSF-01 Stud Finder Wall Scanner

It can detect steel rebar at 2.25 inches deep and AC wires at 2 inches deep. VIVREAL VIVSF-01 uses a LCD monitor to show you the proximity and material of the sought after object. Also, it emits a sound warning that lets you know when you’re near of the target.

VIVREAL VIVSF-01 is certainly one of the cheapest options on the market. You don’t need to recalibrate it each time you use it, which is very convenient. It works well on plasterboard surfaces, but its detection range is quite limited. It isn’t the most accurate tool of all, and it may convert the stud searching process in a guessing game.

3. Tavool 5-in-1 Stud Finder Wall Scanner

Tavool 5-in-1 Stud Finder is more accurate and consistent than other models from the same brand. Its Deep Stud Scanning mode allows a deeper searching on thicker surfaces. It also can detect live AC wires at 2 inches deep. Its LCD monitor and sound warnings allow you to have a clear idea of ​​the target’s proximity.

The LCD monitor also shows you when it’s convenient to change the batteries. By pressing a button, you can vary between 5 different scanning modes to find wooden and metal studs, pipes and wires.

With 5 different scanning modes, this tool certainly can detect whatever crosses its path. However, it isn’t 100% accurate and many times you could get a false reading. So, you must be careful when doing a deep scan with this tool. You may end up drilling your walls on the wrong point.

4. Homder 5-in-1 Stud Finder Wall Scanner

It has 5 different detection modes to find metal and wooden studs, rebar, pipes and wires. It can reach up to 2.36 inches deep to detect metal elements inside walls, ceilings and floors. Its sound warnings and LCD monitor let you know the proximity of the target. The louder the sound, the nearer you’re.

Homder 5-in-1 provides a superior scanning system thanks to its micro-sensor chip. It’s accurate most of the times. However, it seems it loses its calibration during use, providing inconsistent results. So, you must calibrate it over and over again if you don’t want to drill in the wrong place.

5. Tavool TH510-Yellow Stud Finder Wall Scanner

Its striking yellow color makes it visible to the naked eye, so you can easily find it among your other tools. In addition, it has an ergonomic design that adapts to the shape of your hands for a more comfortable use. Tavool TH510-Yellow also has 5 different scanning modes to detect all kind of wooden and metal elements behind walls, ceilings and floors.

Certainly, the striking color and design of this stud finder are their most interesting features. It’s very accurate detecting superficial wooden studs and wires. However, it loses accuracy when detecting deeper elements. Also, it doesn’t work well on concrete and brick walls.

6. Franklin Sensors FS710PRO Stud Finder

It has 13 different sensors for more accurate results. Franklin Sensors FS710PRO doesn’t require previous calibration to start working. It also has a bubble level and you can use it as a ruler. In contrast with other models, Franklin Sensors FS710PRO has no monitor. However, it uses LED lights and sound warnings to let you know the proximity of the target.

In contrast to other products, this one doesn’t require previous calibration, saving your valuable time. It’s also versatile and easy to use. However, it has no monitor and it’s too expensive, considering its cheap design and fabrication. Certainly, you can find something better for less money.

7. Zircon SS e50 Electronic Stud Scanner

Zircon SS e50 is one of the most popular models on the market. It has an ergonomic design that adapts to the shape of your hands. Also, it emits a red light to indicate the exact location of the target. It only has 2 scanning modes, but it’s as efficient and accurate as the most advanced models.

So it may seem cheap and simple, but Zircon SS e50 certainly is one of the most accurate stud finders on the market. It provides consistent results most of the times. Also, it has a practical red light to spot the center point. However, it doesn’t work well on irregular surfaces, which is a big con.

8. Franklin Sensors ProSensor 710 Stud Finder

In essence, it’s the same FS710PRO model but with a slight difference: it doesn’t have a bubble level. As its counterpart, it uses 13 different sensors to detect hidden elements inside walls, ceilings and floors. Instead of a LCD monitor, it uses LED lights as indicators. Best off all, it doesn’t require previous calibration. You just turn it on and it’s ready to use.

As said before, it’s the same FS710PRO model but without a bubble level. The basic features remain the same. The price is slightly lower than its counterpart. However it keeps being too expensive, considering that it doesn’t have an LCD monitor or battery level indicator.

9. VSTM 5-in-1 Stud Finder Wall Scanner

At first sight, it seems like the remote control of your AC unit. So, its design isn’t striking at all. However, its accuracy is something out of this world. It automatically calibrates when turned on. Also, it has 5 different scanning modes to detect wooden and metal studs, pipes, rebar and wires. It also can detect copper wires at 2.4 inches deep.

But, VSTM 5-in-1 isn’t just the best stud finder for plaster walls. It can also measure the relative angle between surfaces. Its LCD monitor also shows you when it’s time to replace the batteries.

VSTM 5-in-1 works as the best stud finder app and angle measurement tool. It’s so easy to use and it calibrates automatically after turning on. However, it may provide false results sometimes, so it’s convenient to pass the tool several times on the same place before drilling the surface.

10. Tavool 4-in-1 Stud Finder Wall Scanner

It uses 4 different scanning modes to reach deeper than others. It can detect AC wires at 2.3 inches deep. Also, it can detect metal and wooden studs, pipes and rebar. Tavool 4-in-1 shows you the exact location of center points to install TV mounting frames and wall pictures.

Tavool 4-in-1 is accurate and you can use it on many different materials. It detects wooden and metal studs so easily. Also, it’s easy to use and calibrate. However, it tends to turn off during use, which is quite frustrating. In addition, it provides false results sometimes, so you must be careful before drilling.

Buying Guide – Wooden Stud Finder

Finding wooden and metal studs inside walls without the right tools is harder than it seems. For example, you could leave your wall like a piece of Swiss cheese after drilling holes randomly. Certainly, you’ll have to spend some extra money on materials to repair your walls.

For those cases, the best stud finder on the market can be very useful. Stud finders use electromagnetic waves to determine the change in density between materials. This way, they can detect different objects behind the walls, floors and ceilings. Having one of these tools will help you save time and make precise perforations.

If you’re a contractor or an enthusiast of household activities, this is certainly the tool you need. However, you must be careful before buying. Many stud finders aren’t as good as they seem. Some have a too limited scanning range. Others are inconsistent, generating wrong alerts too frequently.

So, if you don’t want to regret after buying, you need to read this. Below, you’ll find a step-by-step explanation to learn how to choose the best stud detector for you.

Magnetic vs. Electronic

Basically, there are two different types of stud finders: magnetic and electronic. Each type works differently, but retaining the same main purpose. Depending on certain circumstances you must choose a specific type to work. Below you’ll find some valuable information about each one.

Magnetic Stud Finders

These models are the cheapest you can find. In contrast with electronic devices, magnetic stud finders aren’t so accurate. In addition, they’re virtually useless for finding wooden elements behind walls, ceilings and floors.

However, they’re very useful for finding metal elements such as fasteners, pipes, rebar and wires. The best magnetic stud finder doesn’t need a power source like its electronic counterpart. You just need to pass the tool over the surface and it will get stuck in presence of a metal element.

Magnetic stud finders are useful on thicker surfaces, where usually electronic models tend to fail. So, they’re the best to use on concrete and brick walls. Also, magnetic stud finders are lightweight and portable. You can always carry one of these in your pocket or keychain.

Best magnetic stud finders are made with small neodymium magnets. These magnets have a superior magnetic force, allowing detecting metal elements covered by several layers of material.

Best of all, magnetic stud finders can last a lifetime. So, you won’t need to buy several of these tools during your life or worry that they may stop working at a certain moment.

Electronic Stud Finders

These devices are much more accurate than magnetic stud finders. They need batteries to work, so you’ll have to spend money on new batteries from time to time. Electronic stud finders generate electromagnetic waves that bounce off different materials.

During the process of calibration, electronic devices must be placed on clear surfaces, away from metal or wooden elements. At this point, the device recognizes under which conditions not to issue alerts. So, the indicating bars on the screen disappear.

While you move the device over the surface, the electromagnetic waves bounce off constantly. If the material doesn’t change, there will be no alert. However, when the waves bounce on metal or wood, the indicating bars start moving while an audible sound gets out the speaker.

Electronic stud finders tend to lose accuracy when working on too thick surfaces. So, you may get false alarms when working on lath and plaster walls. On the other hand, when you work on concrete or brick walls, you won’t get any response.

Electronic stud finders are usually more expensive than magnetic devices. To bring a good model home, you’ll have to spend more than $50. Usually, more expensive models use more sensors for more accurate detection.

Scanning Modes

Electronic stud finders can have different scanning modes to detect different elements at different depths. In these cases, the rule is simple: the more scanning modes it has, the better.

Some scanning modes allow differentiating materials. You can also determine if there’s electrical current passing through existing wires. So, these tools are perfect for masons, plumbers and electricians.

In some models, you can vary between different scanning modes to get an approximate idea of ​​the distance between the surface and wooden studs. That way, you’ll know how long your drill tip should be to get to the stud.

Scanning Depth

Not all models can reach the same depth. Usually, more expensive models can detect more different elements and reach greater depths. If you’re going to use your stud finder to detect pipes and rebar on floors, you need more scanning depth.

Better models can detect at depths greater than 2 inches. So, before you buy, check how deep you can reach using the different scanning modes. If you need more, you’ll certainly have to pay more.

It’s always good to spend some extra money on a model that offers more scanning depth. That way, you can get accurate results even on too thick surfaces. If scanning depth isn’t enough, you won’t get any alerts from your tool, even if you’re above the target. In other cases, you could get false alerts, making you commit many mistakes.

Visual Indicators

Usually, electronic stud finders use two basic visual methods to indicate when there’s a target nearby. These are: LED lights and LCD monitors. Some users prefer LED lights for their simplicity. Some models use a different combination of colors to indicate the proximity of the target.

LED lights are very useful, but not so accurate. On the other hand, LCD monitors can display valuable information about the target. For example, its material, proximity and location of the center point.

Some LCD monitors include back lights that allow you to use your stud finder in low light conditions. So, the darkness of the night won’t be an excuse to stop working. Usually, LCD monitors use indicating bars to show the proximity of the target. The more bars you observe on the monitor, the nearer you’re.

On stud scanning mode, a small triangle appears on the bars when you reach the center point. The tip of the triangle marks the exact position. Other models emit a red light forming a reverse triangle on the surface.

Most models with LCD monitors also have a battery level indicator. That way you know when it’s convenient to change the batteries before it’s too late. If you don’t want interruptions in your work due to discharged batteries, make sure your stud finder has this valuable feature.

Sound Alerts

If visual indicators aren’t enough for you, you may need a stud finder with sound alerts. You certainly can work without sound alerts when you have LED lights and LCD monitors. However when they fail, sound alerts definitively can help you.

Some models can vary the sound volume depending on the distance at which they’re from the target. The sound becomes louder and more frequent while you get close to the center point.

Sound alerts also can help you find studs, pipes, rebar and wires when the LCD monitor doesn’t have back lights. So, if you frequently work during the night, you should opt for electronic stud finders with sound alerts.

Calibration Mode

Usually, stud finders use manual or automatic calibration. On manual calibration devices, the user must press one or more buttons to calibrate the tool. The process is quick and easy; however it can be tedious sometimes.

Most of the time, manual calibration devices tend to lose calibration when separated from the surface. So, you must repeat the process over and over again, making you waste your precious time.

If time is gold for you, you should opt for a stud finder with automatic calibration. In this case, the tool calibrates itself after being turned on. After that, the tool is maintained calibrated until it’s turned off. So, you won’t have to keep your tool attached to the surface all the time so as not to lose calibration.

Ergonomics

Above all, the best wooden stud finder must be ergonomic. That means that the shape of your tool must adapt to the shape of your hands. This way, you get a better grip and can handle the tool at any position without slip risk.

Some models include anti-slip covers to prevent accidents in case of sweaty hands. Others have curved edges for extra grip. So, if you have clumsy hands, make sure the model you’re going to buy is ergonomic.

Weight

If you don’t want to end up with tired hands and arms, your stud finder must be lightweight. Usually, the more gadgets the tool has, the heavier it is. Fortunately, most stud finders on the market don’t exceed 0.6 lbs.

To avoid problems, choose a good model with less weight. But don’t choose something too light, because you could end up receiving a piece of unusable plastic. As a personal quality control, check if the weight of your tool matches the weight stated on the product features.

If the weight difference is quite considerable, return the product immediately. It’s almost sure that you received an imitation.

Additional Features

Some stud finders come with additional features that you won’t find on any other tools. For example, some of them also work as angle measuring tools. You just need to place them on any surface to determine the relative angle.

Best models come with magnets built into the base. This way, you don’t need to use your hands to keep your stud finder in place.

Other models include a bubble level and you can also use them as rulers. These models are very convenient to make horizontal and vertical marks on the walls to install mounting brackets and cabinets.

And if you’re looking for something more precise, you may opt for stud finders with incorporated lasers. They include laser tips in a vertical and horizontal position to install several elements at the same level. Usually, stud finders with lasers are the most expensive of all. However, they’re worth any penny you spend.

Brand

If you’re looking for a new stud finder, you’ll certainly find many different brands and models on the market. With so many different options, it will surely be difficult to choose just one. However, you can reduce your purchase options by opting only for models from well known brands.

Usually, generic brands use low quality materials to reduce manufacturing costs. In addition, they don’t follow any quality control nor do they have the approval of regulatory bodies. Sometimes, you won’t find the manufacturer’s data anywhere. And that’s certainly a bad sign.

So, if you choose a model that’s too cheap, it may stop working after the first days of use. If you don’t want that to happen to you, save some extra money and buy a more durable and resistant product.

If you don’t know much about brands of stud finders, don’t worry. In this article you’ll know the 3 best brands on the market. If you choose any of them, you can be sure that you’ll take a high quality product home.

You can read more about stanley stud finder

Reviews

Many people are easily convinced by the good things they read on best stud finder reviews. However, most of the reviews you find on many shopping websites are fake.

For example, many online sellers pay other users to write good reviews about their products. So, if you find a product that only has good reviews, there are two things that you may think. Maybe the product is too good or is a complete scam.

So, to clarify your doubts, it’s better to visit other websites and read different opinions about the same product. A good sign that shows you that a product is really good is its sales volume. If the number of sold units remains stable for several months, the product is certainly good.

Maybe you find some bad reviews. However, if they aren’t too many, you shouldn’t worry too much. Some people have bad luck and receive defective products. And that can happen hundreds of times.

Check out the number of bad reviews and good reviews. Then compare both numbers and make your own decision. Also verify the reputation of the seller. If the seller is responsible and doesn’t disappear when something goes wrong with the product, you certainly can buy.

Price

Most of the stud finders that you find on the market have quite affordable prices. For less than $30 you can buy a pretty decent model. However, as said before, the lower the price, the lower the quality. So, stay away from too cheap products.

If you don’t want to take risks, invest some good money on a high quality product. So, take your time and investigate which models best suit your requirements. Then compare prices and determine which one suits your budget.

You can find different prices on shopping websites and physical stores. To get a clear idea of the actual price of the product, you can visit the official website of the manufacturer. Determine the average value of the obtained prices and then choose the product with the price closest to that value.

Never choose the most expensive or the cheapest option. You could end up terribly disappointed after buying.

If your budget isn’t enough to buy a sophisticated electronic model, you could save some extra money and opt for a magnetic model. If you’re only going to use your tool to detect metal studs, pipes, rebar and wires, you won’t need to buy something too expensive.

So, the final decision is up to you. Also remember that the more features the stud finder has, the more expensive it will be.

Best Brands of Wooden Stud Finder

Certainly, the market is full of different models of wooden stud finders. Some good and some bad. So, you must be careful before making the final decision. If you opt for generic products, you’ll certainly end up disappointed. Fortunately, there are 3 brands on the market that you can always trust.

Here you’ll find some valuable information about of these well-know brands.

1. Zircon

Zircon is a well-known brand of electronic appliances. Its headquarters are located in California, United States. It first started as a manufacturer of LED watches in 1975. Then, in 1980, Zircon developed the StudSensor, which is by far their best-selling wooden stud finder.

Zircon SS e50 is one of the most versatile stud finders from this company. It only uses 2 different scanning modes, but it works just as well as the more advanced models.

2. Franklin Sensors

Franklin Sensors is a manufacturer company of stud finders located in Meridian, Idaho. Its models are famous for their high portability and accuracy. Its founder worked for several years with the most prestigious high tech companies, including Intel, Samsung and Broadcom. Years later, he used his knowledge in electronics to develop the first instant stud finder.

Its FS710PRO model uses 13 different sensors to reach deeper than other products. You can also use it as a ruler. So, if you’re looking for something versatile and durable, choose Franklin Sensors.

3. Homder

Homder is an appliance manufacturer, located in Shenzhen, China. Its best stud finder can reach more than 2 inches deep, using 5 different scanning modes. So, if you need to find metal and wooden elements on too thick surfaces, this is certainly the brand you should choose.

Wooden Stud Finder FAQs

Certainly, after reading so much information you may feel a little confused. If you still have serious questions about wooden stud finders that need an urgent explanation, don’t worry. These FAQs and their answers can help you.

Q1. How far apart are studs?

Answer: Usually, studs inside a wall are separated at a distance between 16-24 inches. So, by knowing the distance between 2 studs, you can determine the location of the rest.

Q2. How to use a stud finder?

Answer: Using a stud finder is very simple. You just have to move the tool above the surface, using the visual indicators and sound alerts as a guide. When you reach the center point, the indicating bars reach their maximum level and the sound becomes louder.

Q3. How to find a stud without a stud finder?

Answer: Check the nails on the baseboard. Usually, these nails are attached to the studs. In the case of metal studs, you can also use neodymium magnets. These magnets are so powerful that they can find metallic elements more than 2 inches deep.

Q4. How to find a stud with a flashlight?

Answer: Using a flashlight, illuminate the surface and look for dimples or bumps. Usually, the nails that hold the wall to the studs are located at these points.

Q5. How do electronic stud finders work?

Answer: Electronic stud finders generate electromagnetic waves that detect the change in density between different materials. When the waves bounce on the sensors, they generate a certain response.

Q6. Can all stud finders measure angles?

Answer: No. Before buying, make sure this feature is included in the product.

Q7. Which is the best way to cut metal studs?

Answer: Certainly, using a good pair of tin snips is the best way to cut metal studs.

Q8. How do magnetic stud finders work?

Answer: Magnetic stud finders use magnets to work. The magnetic force attaches the stud finder to the surface when there’s a metal element below.

Final Verdict

Stud finders certainly make your life easier. They prevent you from perforating your walls randomly and also save your valuable time. Above all, wooden stud finders are practical, portable and cheap. You won’t need to spend a small fortune to buy one. So, this is the best time to take one home. If you follow each of the tips in this buyer’s guide, you’ll certainly find the model you really need.

So are you looking to buy the best 4 cycle weed eater?

What is the reason?

Do you know the actual uses of this tools?

Don’t know?

No worry! As a result we are here to give you the answer that you need. But before that, we have something for you. So let’s do the first.

Certainly, cutting the grass is one of the most hated household activities. Especially if you only have hand tools to do it. After finishing the job, you’ll certainly end up sweaty, tired and full of pain. Over time, repeating this same routine could cause irreparable damage to your health.

Some people prefer to escape from such torture and hire professional gardeners to take care of everything. However, not all people have enough money to pay for services like this every week.

If that’s your case, buying the best weed wacker is the best solution. These tools powered by electricity or gasoline, can cut large grass areas in no time.

In this article, you’ll learn how to choose the best commercial weed eater for you considering some basic aspects before buying. You’ll also know the 10 most popular products that everyone is taking home on 2022.

Best 4 Cycle Weed Eater 2022

Benefits of Best 4 Cycle Weed Eater

When a job seems too difficult for a common lawn mower, the best weed eater for the money is all you need. These tools are lightweight, versatile and fast. If you’re tired of spending money on gardeners every week, you certainly need to buy one of these.

Below, you’ll find some reasons why buying the best rated weed eater is always a good idea.

Money Saving

Certainly the best weed eaters allow you to save money, because:

Versatile

Above all, 4 cycle weed eaters are versatile, because:

Easy to Use

Also, 4 cycle weed eaters are easy to use, because:

Durable

In addition, 4 cycle weed eaters are durable, because:

Top Ten 4 Cycle Weed Eater Reviews

Certainly, there are many string trimmers on the market. But not all can cut all kinds of grass and weed. So, if you’re looking for a durable, powerful and versatile tool, pay close attention. Here’s a top 10 list with only the best budget weed eater.

1. Husqvarna 129C String Trimmer

It uses a curved shaft that evenly distributes weight, preventing tired arms and shoulders. Also, it provides superior cutting power using a 27.6 cc gas-powered engine. Husqvarna 129C also provides 17 inches of cutting path, which is much more in contrast with similar models.

It’s “Tap N ‘Go” system allows releasing a new trimmer line by tapping your tool against the grass. Also, the trimmer line replacement is so easy to install. In addition, this tool has a translucent tank that allows you to easily verify the fuel level.

Certainly, Husqvarna 129C is the best gas weed wacker on the Internet. It’s lightweight, stable and easy to use. Also, it’s “Tap N ‘Go” system allows releasing more trimming line with no work interruptions. However, the trimmer head isn’t powerful enough to cut hard grass, which is very disappointing.

2. DeWalt DCST920B String Trimmer

This product uses a brushless engine powered by an electric battery. Also, it’s lightweight and easy to maneuver. It provides a 13-inch cutting path using a dual trimming line. In addition you can control the cutting speed from the handle, for different grass conditions.

The battery and charger are sold separately.

DeWalt DCST920B is certainly good. But not exactly the best battery operated weed wacker. The cutting head is too small, providing a reduced cutting path. Also, the cutting string tends to break so easily. The head guard is virtually useless, so your legs will end up covered with grass after working with this tool.

3. WORX WG163 GT String Trimmer

WORX WG163 GT String Trimmer has an adjustable head that allows you to turn it into an edger. So, you can get perfectly straight borders when using this tool. Also, you can release new cutting string by just pushing a button. This tool works with a brushless electric motor powered by a lithium battery.

It also includes rubber wheels on its head which allow you to easily move your tool while you’re using it as an edger. WORX WG163 GT String Trimmer also provides a 12-inch cutting path, which is ideal for delicate and precise duties.

Certainly, WORX WG163 GT String Trimmer is versatile and easy to use. It allows you to perform delicate and precise works that would be impossible for a regular string trimmer. However, the battery life is too short, causing recurrent interruptions. Also, the cutting head tends to get stuck with hard grass.

4. Husqvarna 128CD String Trimmer

Its 28 cc gas-powered engine provides more power to cut the hardest grass. Also, its curved shaft evenly distributes weight for better carrying and handling. Its Smart Start system eliminates air from carburetor, allowing a fast and smooth start. Also, its “Tap N ‘Go” mechanism allows releasing new cutting string by simply tapping the head against the floor.

The design of the cutting shield provides the required protection and maximum visibility. This product also provides a 17-inch cutting path.

Husqvarna 128CD provides a superior cutting power thanks to its powerful engine. However, despite of its Smart Start system, this machine keeps being difficult to start. Also, the cutting string may be hard to install, making you waste a lot of time.

5. CRAFTSMAN WS405 String Trimmer

CRAFTSMAN WS405 uses a straight shaft for a stable handling. With this tool, trimming around bushes and reaching difficult areas is a piece of cake. Its 29 cc gas-powered engine emits low noise. So, you can use it without risk of disturbing your neighbors. Also, it uses a dual starting system, which makes faster the starting process.

It provides 17 inches of cutting path, which is more than other similar models can provide.

CRAFTSMAN WS405 is certainly a worth buying product, especially if noise generation if your biggest concern. Also, its straight shaft provides more stability and allows you to reach difficult corners. However, it may be too heavy for some people.

6. SENIX GTS4QL-L String Trimmer

SENIX GTS4QL-L String Trimmer is more lightweight and stable in contrast with other models. Also, its straight shaft allows better reaching difficult corners. In addition, you can adjust the cutting head to use your trimmer as an edger. But, best of all, it provides a 17.7-inch cutting path, allowing to cover big areas in no time.

Its 26.5 cc 4-cycle gas engine emits less noise and vibration for a comfortable and quite experience.

Certainly, SENIX GTS4QL-L String Trimmer has a wider cutting path, which makes it the perfect tool for heavy duties. So, this tool will help you be more efficient, covering more cutting area in less time. However, the cutting string tends to get stuck so frequently, especially when you’re working on hard grass.

7. Greenworks GST80320 String Trimmer

Greenworks GST80320 uses an electric brushless engine, capable to provide the same cutting power than a 32 cc gas-powered engine. Also, the cutting string is so easy to replace. A special mechanism on the cutting head allows releasing more string with the push of a button.

A fully charged battery provides 45 minutes of uninterrupted work. Also, its straight shaft provides more stability and better reaches difficult corners.

Greenworks GST80320 is the best weed wacker string trimmer for heavy duties. On the other hand its powerful engine provides superior cutting power for any kind of grass. Most importantly it cuts pretty well and you don’t need a second pass for better results. However, the cutting head is too fragile, mostly made of plastic.

8. Honda HHT35SLTAT String Trimmer

Honda HHT35SLTAT is all about power. Its 35 cc gas-powered engine provides superior cutting power for clean cuts. Its also has a stable straight shaft, which allows you to reach the most difficult corners. In addition, it provides a 17-inch cutting path to cover bigger areas in less time.

Honda HHT35SLTAT certainly has a powerful engine, but the carburetion system has a big design flaw. The air passage to the carburetor doesn’t have an air filter, allowing dust particles to enter. The excessive accumulation of dust makes the engine to lose power with time.

9. CUB CADET SS470 String Trimmer

CUB CADET SS470 provides a 17-inch cutting path to cover big areas in no time. Its 25 cc gas-powered engine also provides more power to cut the toughest grass types. In addition, the cutting string is so easy to replace. To release more string, you just need to tap the cutting head against the grass. Its straight shaft better reaches difficult corners and it’s perfect for straight cuts.

CUB CADET products are well known for their high quality and durability. And SS470 String Trimmer isn’t an exception. It’s made with the best materials to resist heavy duties. Also, the cutting string is easy to replace. But, it’s certainly heavier than similar models, so you need strong arms and shoulders to use it.

10. Husqvarna 28LD String Trimmer

Husqvarna 28LD String Trimmer has a detachable shaft for easy and compact storage. It’s “Tap N ‘Go” system allows releasing new cutting string by tapping the cutting head against the grass. Its translucent fuel tank allows you to easily check the gasoline level. In addition, its Smart Start technology allows starting your tool with no effort.

Certainly, Husqvarna 28LD is compact and easy to store. Also, it includes the same interesting features of other models from the same brand. However, its engine has a serious defect. It loses compression so easily. Also, it may stop when working at the highest speed.

Buying Guide – 4 Cycle Weed Eater

Certainly, cutting lawn with hand tools isn’t exactly an easy job. After a long day at work, you’ll probably end up with pains and blistered hands. In addition, hand tools aren’t as efficient as machines. Cutting the grass of a too large area could take several days.

Fortunately, since lawn mowers arrived, our lives are much easier. Mowing is no longer a nightmare and the process only takes a few minutes of your valuable time. However, in some cases, the cutting power provided by lawn mowers isn’t enough.

If the lawn is too high, the blades of a lawn mower could get stuck. So, in these cases, you need a more powerful and versatile tool to get the job done. And there’s no better machine to do this than a string trimmer.

String trimmers, also known as “weed eaters”, are specially designed for heavy duties. They’re lightweight, practical and allow you to reach difficult corners where common mowers can’t reach.

However, not all weed eaters you find on the market are really effective. Some tend to get stuck with hard grass. Others tend to break the cutting string so easily. So, you must choose wisely or you’ll end up regretting after buying. However, you may commit serious mistakes if you take a decision without the required knowledge.

In this buying guide you’ll learn everything you need to know to choose the best cheap weed eater on the market.

Weight

Above all, your string trimmer must be lightweight. These tools don’t rest on the ground, as it happens with lawn mowers. Instead, their weight rests on your arms and shoulders. So, the golden rule here is: the less the weight, the better.

Lighter models have a weight between 6-12 lbs. Although they’re more portable and easy to use, they aren’t exactly the most recommended for heavy duties. On the other hand, more powerful models can weigh between 15-17 lbs. They’re perfect to cut too tall and too hard grass. However, they’re less maneuverable than light models.

So, if you’re going to buy something heavy, make sure that it comes with comfortable shoulder straps. These add-ons evenly distribute the weight of the tool on your body. This way, there’s less chance of ending up with tired arms after each job.

Other models also include a shaft handle that allows you to hold the shaft with one hand, preventing the transfer of vibration.

Size

Size can play in your favor or against you. For example, a longer shaft allows you to reach difficult corners very easily. Also, you can make straight cuts over tall bushes very easily. However, longer shafts provide less stability.

So, you need having strong legs and strong arms to not lose balance. Also, string trimmers with long shafts are more difficult to store. However, retractable shafts are the best solution to this problem. These kinds of shafts can reduce their length by half, so you can store them in small spaces.

Other models can be completely removed, allowing you to divide your string trimmer into two pieces.

Electric vs. Gas Powered

Most string trimmers available on the market use gas powered or electric engines. Each model has its own pros and cons. In short only you can decide what’s the most convenient option depending on your requirements.

Electric Engines

Electric models use brushless engines to work. These engines produce less noise than their gas-powered counterparts. So, if your neighbors don’t tolerate high noise levels, it’s better to opt for one of these.

In addition, the friction between the rotor and the stator is minimal, reducing wear and waste generation. So, brushless motors require very little maintenance, allowing you to save more money. And best of all, they don’t pollute the environment.

Electric engines on string trimmers are powered by rechargeable lithium batteries. A single battery can provide up to 45 minutes of uninterrupted work when fully charged. However, this time tends to decrease while the battery gets older. So, electric models aren’t the most recommended for too large areas.

Also, these batteries may explode if they overheat or scratch. So, you must use them carefully so as not to suffer serious burns.

Gas Powered Engines

On the other hand, gas powered engines are more powerful than electric ones. Gas powered models need lubricant and gas to run. So, operating expenses in these cases are much higher.

Combustion engines generate mud and other debris that can interfere with the movement of the pistons. This results in a considerable loss of power. In addition, the gases resulting from combustion are highly polluting. So, gas powered engines aren’t exactly the safest option for the environment.

However, despite the high emission of noise and polluting gases, gas powered models provide a longer time of independent use. So, you won’t need to stop to recharge the battery or connecting to a nearby outlet.

Before buying, verify that the string trimmer has an air filtration system. It’s important that the air entering the carburetor be as clean as possible for proper combustion. If the carburetors are dirty, the mixture of oxygen and gasoline vapors will be insufficient. The end result will be poor combustion.

To prevent this, it’s advisable to clean the filters periodically or replace them in case of any cracks to considerable damage.

Engine Displacement

The engine displacement, usually designated in cubic centimeters, is the most common way to indicate the size and power of piston motors. Before buying a gas powered string trimmer, you should check if the displacement of the engine is enough for you.

The engine displacement is the total volume that the pistons travel inside the combustion chamber.

Engine displacement on string trimmers may vary between 25-35 cc. And the higher the value, the bigger and powerful the engine is. For too tall and hard grass, you’ll require more engine power to prevent the cutting head form getting stuck. In these cases you’ll need 30 cc or more of engine displacement to get the job done.

Materials

As said before, your string trimmer must be lightweight and highly resistant. So, it must be made with the best materials. Steel and carbon fiber or are by far the best for these purposes.

For example, the shaft must be resistant so as not to break or bend with high impacts. In addition, it must withstand high temperatures and UV rays. Steel is a very resistant material, however, it isn’t exactly the best for wet environments.

The natural moisture of the grass can generate rust. Therefore, steel shafts must have a special coating to better resist corrosion. On the other hand, carbon fiber is as strong as steel and doesn’t generate rust. Also, it considerably reduces the weight of your tool.

Carbon fiber is flexible so it recovers its original shape when high pressure is applied. However, string trimmers with carbon fiber shafts are usually the most expensive.

Cutting Head

The secret of a good cut certainly is on the best weed eater head. Above all, its design should allow an easy installation and releasing of the cutting string. Best models can automatically release the cutting wire by tapping the head against the grass. This mechanism is quite practical, but it tends to break the cutting string.

More advanced models allow releasing the cutting string by pressing a button on the handle. When the user does this, retainers release the string rolled around of the cutting head. The centrifugal force does the rest. When the user stops pressing the button, the retainers attach again the cutting string.

But that’s not all. Some models can rotate the cutting head at a 90 degree angle, allowing the string trimmer to be used as an edger. A rubber wheel next to the cutting head allows moving the tool on all types of surfaces.

The head guard should be wide enough to prevent grass pieces from crashing into your legs. Some head guards use less material under the pretext of facilitating visibility. However, they’re completely useless.

Cutting Path

The cutting path is the maximum diameter that cutting streams can cover while rotating. Usually, this feature depends mainly on two factors: the head size and the engine’s power.

Certainly, the engine must generate more power to move a bigger and heavier cutting head. A wider cutting path provides a higher performance, allowing you to cover a larger area in less time.

The cutting path of grass trimmers can vary between 12-18 inches. Before buying, verify the trimmer has an adequate engine according to its cutting path. For example, models with more than 17-inches of cutting path require engines larger than 35 cc.

If the engine doesn’t have enough power, the cutting head will tend to get stuck when cutting. Also, be sure to use a high quality cutting string if the engine generates too much power.

Easy Start

As said before, air filters are essential to protect the carburetor. Inside the carburetor, air and the best weed wacker gas combine. When both components are mixed in the correct concentrations, combustion is optimal. That way, the explosion inside the combustion chamber pushes the pistons harder, generating more horsepower.

Best models have an easy-start system, saving fuel on each start. To achieve this, they combine an advanced filtration system and a higher air intake.

Additional Features

Most popular models include some interesting features like a quick start button, preventing the user from pulling a string to start the trimmer. Or a translucent fuel tank, which allows you to easily check the fuel level.

These additional features will certainly make your life easier and will help to extend your trimmer’s lifespan.

Brand

If you’re looking for something good and durable, you should only opt for the best brands. If you run the risk of buying something you don’t know you could get an unwanted surprise. Usually, the most recognized brands offer long-lasting warranties for all their products.

Some models include a 30-day money back warranty and a 2-year limited warranty. This means that if the model fails during the first month of use, you can demand your money back. In addition, during the first two years, repairing and replacement parts costs are completely free.

However, you’ll maybe have to pay the shipping costs if the technical service is too far from your home. So, before buying, verify that there’s a technical service near you so you can get there with your car and save some extra money.

Also, make sure the brand or manufacturing company has a website or phone to contact. Otherwise, consider other options.

Reviews

Today, information is everywhere. Using a tablet, computer or smartphone, you can access the Internet and find what you need. So, if you have many questions about the quality and performance of the best lightweight weed eater, you should check out some reviews before buying.

On the Internet, you can find many reviews in online stores or reviews websites like this. Many people dedicate their lives to try the most popular products on the Internet and then share their personal opinions with other users.

During your research, be sure to visit different websites to get different versions of the same truth. If the opinions are too good to be true, it’s better to have doubts.

When checking out reviews, verify that the number of positive opinions is much higher than negative ones. Also consider what buyers write about the seller. Is he/she responsible and communicative? Responds to other users’ complaints or disappears when there are problems?

If everything seems to be fine and the sales level has remained high in recent weeks, it’s certainly a good idea to buy.

Price

Most of the time we all have to find the best product in cheap price. That’s why I think Price is most important and I make some point to elaborate it. Lets have a look on it.

1’st Look

Once you find the model you really need, it’s time to find the best price. And to do so, it’s convenient that you start looking for prices in hardware stores and shopping websites. To have a clear idea of ​​the actual price of the product, it’s convenient that you visit its official website.

Careful

Sometimes, you can find better deals on a shopping website. But you must be careful. If the price is too low, it’s probably an imitation. In the case of string trimmers, it’s convenient that you verify the quality of the product before buying. And the best way to do this is to visit a physical store and try one.

Risk

That way, you can personally check the product features, weight and quality of materials. If your budget is enough to buy, do it. Otherwise, it’s better to take the risk and opt for online shopping.

What if you find too many product in same price

If you’ve found several prices for the same product, calculate the average value. Then, choose the string trimmer with the closest price to that value. If that price is still too high for you, you should consider other options.

Example

For example, you could choose an older version of that same product. Some companies usually update their products every year. Most of the time, it’s just a design change. So, old models still retain the same features of newer models. And best of all, they cost the half of the price.

Tips

Also, you could opt for second hand products. They’re certainly the best option if your budget is too low.

Best Brands of 4 Cycle Weed Eater

Certainly, when you buy a certain product for the first time, the chances of choosing wrong are high. Especially when there are too many options in the market to choose from. However, that won’t happen if you always opt for the best brands on the market.

Below, you’ll find some valuable information about the best 3 brands of 4 cycle weed eater.

1. Husqvarna

Husqvarna is a prestigious Swedish brand of mechanized tools and motorcycles. It’s currently owned by Husqvarna Group, a powerful conglomerate who also owns Gardena and McCulloch brands. All Husqvarna products are sold exclusively through the Internet.

Its gas-powered string trimmers are powerful, versatile and lightweight. Also, they have unique features that you won’t find in any other product.

2. DeWalt

DeWalt is a famous brand of manual and automatic tools. Its headquarters are located in Towson, United States. DeWalt began in 1924 as a small factory of saws for carpentry. Over time, the company’s production diversified greatly. Today, it produces more than 200 different tools.

Its string trimmers are among its top-selling products. They’re powerful and durable. So, if you’re looking for something that may last forever, choose a DeWalt product.

3. WORX

WORX is a manufacturer of automatic tools, located in North Carolina, United States. Its products are eco-friendly, designed to reduce the emission of toxic gases and noise.

Their string trimmers are very versatile and can transform into edgers. All products from this brand also include a long lasting warranty.

4 Cycle Weed Eater FAQs

If after reading all this information, you still don’t find the answers to your questions, don’t worry. In this FAQs section you’ll find everything you need to know.

Q1. How to start a weed eater?

Answer: Usually, there are two ways to start the best gas powered weed eater: by pushing a quick start button or by pulling a string.

Q2. How to put string on a weed eater?

Answer: Follow the list to put string on a weed eater.

1. First of all, place the weed eater on a flat surface.
2. Then, remove the spool and bump knob from the trimmer head.
3. After that, cut a new piece of cutting string (between 10-20 feet).
4. Thread the half string trough the holes of the spool.
5. Then, thread each of the string extremes trough the holes of the trimmer head.
6. After that, connect the spool and bump knob.
7. Finally, turn the bump knob counterclockwise to roll the string around the spool.

Q3. How to start Echo weed eater?

Answer: If you are going to start echo weed eater, follow the below steps:

1. First of all, press the purge valve of the carburetor.
2. Then, turn the choke switch on.
3. After that, turn the start switch on.
4. Finally, pull the start string.

Q4. How to use weed eater?

Answer: To use a weed eater, you must first turn it on. Then, you have to put the cutting head close to the grass and move your arms and shoulders from side to side.

Q5. Electric vs. gas-powered. Which one is the better?

Answer: It all depends on your requirements. Electric models provide less noise and no polluting gases. Gas-powered models provide more power and less work interruptions.

Q6. What is the average weight of the best gas powered weed wacker?

Answer: 6-12 lbs for lightweight models. 15-17 lbs for heavy models.

Q7. Can I use a weed eater as and edger?

Answer: Yes. Some weed eaters allow you to rotate the cutting head to make vertical cuts as an edger.

Final Verdict

Certainly, string trimmers turn the tedious duty of cutting grass into a breeze. They can reach those inaccessible corners for lawn movers and cover large areas in no time. They’re also versatile, lightweight and easy to use.

If you’re a gardening enthusiast or an expert gardener, this is certainly the tool you need. To choose the best of all, carefully follow the advice of this buying guide.