Falling soap bars is a common cause of clogged toilets. When you flush the toilet, it can get stuck in the pipe and not let anything else pass. This is especially common for people who flush wet wipes or toilet paper down the toilet.
You’ve fell a bar of soap into the toilet and it has got stuck into toilet. Horrifying situation, right? Nothing to worry about. In this situation, you just have to know how to get a soap bar out of a toilet?
We’re here to help! In this article, we’ll let you know the easy way to get that bar soap bar out of the toilet – no matter how hard it seems. Just follow our simple instructions and your toilet will be soap-free in no time!
What do I need to get a bar of soap out of the toilet?
Most of us have tried to get bar soap out of the toilet at some point. However, if you’ve ever dropped a bar of soap into the toilet, you know that it can be a real pain to get out. Hence, if you don’t have the right tools, it’s even harder.
Here’s what you need to get your hands on to get that soap out of the toilet –
- Broom or Mop
You’ll need some kind of brush tool to help loosen up the soap and push it down into the drain.
The classic tool for clearing blocked pipes, plungers are also great for getting rid of soap bars in toilets. The suction from plungers can help push the soap down into the drain where it belongs.
- Drain snake
A drain snake is exactly what it sounds like: A long flexible cable with a corkscrew on one end and a handle on the other end. You can use this tool to rotate around in your drain and pull out any debris caught in there including a bar of soap!
Here are some processes you can do to unclog your clogged toilet –
Unclog with Dish Soap
If you want to use dish soap or dish detergent to unclog your toilet, here are the simple steps:
1. First, make sure the stopper is in place to prevent the water from overflowing.
2. Now, pour some dish soap or detergent into the bowl, and let it sit for a few minutes.
3. Next, pour warm water over it and plunge it a few times.
4. Finally, Repeat if the blockage is not cleared.
Unclog with Hot Water
If your toilet is constantly clogging up, it might be time to try unclogging it with hot water. Follow these simple steps:
1. First, Pour a pot of hot water into the toilet and wait for it to reach a boil.
2. Now, once boiling, carefully remove the stopper from the drain and drop it in your soap bar.
3. Finally, let it sit for 3-5 minutes, then use a plunger to suction onto the soap and pull it out.
Unclog with Baking Soda Mixture
Baking soda can be a useful tool to unclog your toilet when it starts to back up. First, pour a baking soda and water mixture down the toilet, and then allow it to do its job giving some times.
The baking soda will help to break up the clog so that water can flow through to the toilet tank again. But, be patient, it might take a little while. However, the toilet will flush on its own eventually.
Unclog with a Plastic Bottle to Create Water Pressure
If you’re struggling to unclog your toilet, there might be a blockage deep down that you can’t reach with a plunger. Hence, try using a plastic bottle as water pressure to see whether that helps.
Before calling a plumber, try pressing the soap bar from the bottom of the bottle with your hands and this should pop the blockage out. But, if that doesn’t work, pour a cup of water into the bottle and place it over the drain in the toilet bowl.
Then wait for 10 minutes and check whether everything is still not working! If anything goes wrong, call a professional plumber.
Unclog with Squirt Gun Toilet Drainer
If your toilet is not flushing properly, chances are that there is a blockage in the drain. However, this can be solved quickly and easily with a quick blast of water from a squirt gun.
Here is how to use it:
1. First of all, wear rubber gloves and clean the water inlet hole of your toilet.
2. Put the squirt gun drainer in the toilet.
3. Now, squeeze the trigger of the Squirt Gun and the clog will be cleared instantly.
4. If the clog is no more, then remove it from the toilet.
5. Flush your toilet and see whether it works normally now.
How to clean the toilet bowl?
It might seem like a daunting task to clean the toilet bowl, but it’s rather simple. However, to clean it in the right way, first, reach down into the waste material and push it towards the drain with your elbow.
This will dislodge any faecal matter or soap residue on top of the water droplets. Next, fill a bowl with warm water and add 1 cup of white vinegar. Now, soak the plunger in the vinegar water and plunge it down into the water droplets.
Finally, swish and rinse everything down with plenty of cold water, then flush as normal!
This easy cleaning method will keep your toilet bowl clean and free of any soap residue.
Troubleshooting tips if all fails?
If the bar of soap doesn’t seem to be coming out of your toilet no matter how much you try, don’t worry. There are a few tricks you can try before calling a professional plumber.
The first one is to break the bar of soap into smaller pieces and flush them down the toilet. If that doesn’t work, pour 2 to 3 buckets of hot water onto the soap bar and let it sit for about 10 minutes.
If neither of those tricks works, you can try calling a plumber to help you remove the soap bar from your toilet. However, with a little bit of patience and luck, you’ll get your bar of soap out in no time!
How to get the soap out of the drain pipe?
If your toilet drain pipe is clogged with soap, don’t worry. Here are the steps to get the bar of soap out of the drain pipe –
- First, grab a plunger and place it over the opening of the drain pipe.
- Apply enough force to pop up the soapy mixture.
- Next, use a bucket or container to catch all of the leftover soap while you clean up.
- Finally, pour a pot of cold water into the toilet and wait until it reaches the level of the soap bar.
- Once it reaches that point, slowly pour some hot water down the drain pipe to melt the soap on top.
How do I know when the soap bar is firmly stuck in the toilet?
If the soap bar is firmly stuck in the toilet, then you will see:
1. The soap bar has been heated up and is no longer flexible.
2. The suds have hardened and are now protecting the soap bar from being dislodged.
3. The soap bar might be too large or thick to fit through the drain opening.
4. The plunger may not be able to break apart the suds enough to dislodge the soap bar.
5. You may need to use hot water to loosen the soap bar and pour that water into the toilet bowl to help get it unstuck.
Is it possible to damage my plumbing if I try to remove a soapy bathtub or shower head from its fixture using brute force alone?
It is possible to damage your plumbing if you try to remove a soapy bathtub or shower head from its fixture using brute force alone. If this happens and water starts coming out of the fixture in large quantities, your plumbing may be damaged beyond repair.
However, if you want to avoid any damage to your plumbing and potential injury, always try using a plunger before attempting to physically remove the bar of soap.
Can water help dislodge a soapy bathtub or shower head from its fixture – even if it’s filled with stubborn suds?
Water can be used to dislodge a soap bar and suds from fixture surfaces. But it may be helpful to pour a bit of baking soda down the drain first. This will help break up soap suds and make them easier to remove.
Can I use baking soda instead of chemical drain cleaners to unclog my toilet?
Yes, you can use baking soda as a natural way to unclog your toilet. Simply pour a cup of baking soda down the drain and wait for it to form a clogged barrier. Then pour a pot of boiling water down the pipe and let it sit for about 20 minutes until the baking soda melts and cleans the pipes.
Toilet clogging can seem a daunting and unsolvable problem. Sometimes the issue isn’t just one of the clogged drains, but soap bars stuck in the toilet. And luckily, you know now how to get a soap bar out of a toilet?
I hope you have the answer now. If your toilet is clogged by a soap bar, the process of unclogging it isn’t too difficult, but you do have to be careful and take some time with the process.